dmesg - 2012-05-03 20:04
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-43) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Mar 31 04:00:05 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000bad84000 (usable)
BIOS-e820: 00000000bad84000 - 00000000badd2000 (ACPI NVS)
BIOS-e820: 00000000badd2000 - 00000000badda000 (ACPI data)
BIOS-e820: 00000000badda000 - 00000000bae06000 (reserved)
BIOS-e820: 00000000bae06000 - 00000000bae07000 (usable)
BIOS-e820: 00000000bae07000 - 00000000bae0a000 (ACPI NVS)
BIOS-e820: 00000000bae0a000 - 00000000bae0b000 (ACPI data)
BIOS-e820: 00000000bae0b000 - 00000000bae15000 (ACPI NVS)
BIOS-e820: 00000000bae15000 - 00000000bae3c000 (reserved)
BIOS-e820: 00000000bae3c000 - 00000000bae7f000 (ACPI NVS)
BIOS-e820: 00000000bae7f000 - 00000000bb000000 (usable)
BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
DMI 2.7 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0BB800000 mask FFF800000 uncachable
3 base 0BC000000 mask FFC000000 uncachable
4 base 0C0000000 mask FC0000000 uncachable
5 base 23FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbb000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bb000000
0000000000 - 00bb000000 page 2M
kernel direct mapping tables up to bb000000 @ 10000-14000
init_memory_mapping: 0000000100000000-000000023fe00000
0100000000 - 023fe00000 page 2M
kernel direct mapping tables up to 23fe00000 @ 12000-1c000
RAMDISK: 17746000 - 1803f6a0
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000badd2068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000badd8b00 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000badd2150 069AB (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bae0cf80 00040
ACPI: APIC 00000000badd8bf8 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000badd8c90 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000badd8e68 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 00000000badd8ea8 000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000badd8f68 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000023fe00000
Bootmem setup node 0 0000000000000000-000000023fe00000
NODE_DATA [0000000000017000 - 000000000001efff]
bootmap [000000000001f000 - 0000000000066fbf] pages 48
(8 early reservations) ==> bootmem [0000000000 - 023fe00000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016d95c4] TEXT DATA BSS ==> [0001000000 - 00016d95c4]
#3 [0017746000 - 001803f6a0] RAMDISK ==> [0017746000 - 001803f6a0]
#4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
#5 [00016da000 - 00016da170] BRK ==> [00016da000 - 00016da170]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000017000] PGTABLE ==> [0000012000 - 0000017000]
found SMP MP-table at [ffff8800000fce60] fce60
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023fe00
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040000
0: 0x00040200 -> 0x000bad84
0: 0x000bae06 -> 0x000bae07
0: 0x000bae7f -> 0x000bb000
0: 0x00100000 -> 0x0023fe00
On node 0 totalpages: 2074771
DMA zone: 56 pages used for memmap
DMA zone: 108 pages reserved
DMA zone: 3817 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 746302 pages, LIFO batch:31
Normal zone: 17913 pages used for memmap
Normal zone: 1292295 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000bad84000 - 00000000badd2000
PM: Registered nosave memory: 00000000badd2000 - 00000000badda000
PM: Registered nosave memory: 00000000badda000 - 00000000bae06000
PM: Registered nosave memory: 00000000bae07000 - 00000000bae0a000
PM: Registered nosave memory: 00000000bae0a000 - 00000000bae0b000
PM: Registered nosave memory: 00000000bae0b000 - 00000000bae15000
PM: Registered nosave memory: 00000000bae15000 - 00000000bae3c000
PM: Registered nosave memory: 00000000bae3c000 - 00000000bae7f000
PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880008a00000 s90328 r8192 d24360 u262144
pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042414
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880008bde000 - ffff88000cbde000
software IO TLB at phys 0x8bde000 - 0xcbde000
Memory: 8100832k/9435136k available (3083k kernel code, 1136052k absent, 198252k reserved, 2048k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3391.770 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.54 BogoMIPS (lpj=13567080)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x2 -> Node 0
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU1: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x4 -> Node 0
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU2: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x6 -> Node 0
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU3: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x1 -> Node 0
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU4: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x3 ip 0x6000
Initializing CPU#5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x3 -> Node 0
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU5: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x5 ip 0x6000
Initializing CPU#6
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x5 -> Node 0
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU6: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x7 -> Node 0
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
CPU7: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (54273.38 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: group ffff880008a0fae0 cpus 0 (cpu_power = 589) group ffff880008b0fae0 cpus 4 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a4fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a8fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008acfbf0 cpus 3,7 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: group ffff880008a4fae0 cpus 1 (cpu_power = 589) group ffff880008b4fae0 cpus 5 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff880008a4fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a8fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008acfbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: group ffff880008a8fae0 cpus 2 (cpu_power = 589) group ffff880008b8fae0 cpus 6 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff880008a8fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008acfbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a4fbf0 cpus 1,5 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: group ffff880008acfae0 cpus 3 (cpu_power = 589) group ffff880008bcfae0 cpus 7 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff880008acfbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a4fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a8fbf0 cpus 2,6 (cpu_power = 1178)
CPU4 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: group ffff880008b0fae0 cpus 4 (cpu_power = 589) group ffff880008a0fae0 cpus 0 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a4fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a8fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008acfbf0 cpus 3,7 (cpu_power = 1178)
CPU5 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: group ffff880008b4fae0 cpus 5 (cpu_power = 589) group ffff880008a4fae0 cpus 1 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff880008a4fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a8fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008acfbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178)
CPU6 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: group ffff880008b8fae0 cpus 6 (cpu_power = 589) group ffff880008a8fae0 cpus 2 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff880008a8fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008acfbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a4fbf0 cpus 1,5 (cpu_power = 1178)
CPU7 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: group ffff880008bcfae0 cpus 7 (cpu_power = 589) group ffff880008acfae0 cpus 3 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: group ffff880008acfbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a4fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a8fbf0 cpus 2,6 (cpu_power = 1178)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10 64bit mmio: [0xfa400000-0xfa7fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
pci 0000:00:16.0: reg 10 64bit mmio: [0xfa908000-0xfa90800f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xfa907000-0xfa9073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfa900000-0xfa903fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xfa906000-0xfa9063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14 io port: [0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18 io port: [0xf090-0xf097]
pci 0000:00:1f.2: reg 1c io port: [0xf080-0xf083]
pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfa905000-0xfa9057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfa904000-0xfa9040ff]
pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xd7ffffff]
pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xd8000000-0xdbffffff]
pci 0000:01:00.0: reg 24 io port: [0xe000-0xe07f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfa000000-0xfa07ffff]
pci 0000:01:00.1: reg 10 32bit mmio: [0xfa080000-0xfa083fff]
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfa0fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdbffffff]
pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff]
pci 0000:03:00.0: reg 18 64bit mmio pref: [0xdc104000-0xdc104fff]
pci 0000:03:00.0: reg 20 64bit mmio pref: [0xdc100000-0xdc103fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdc100000-0xdc1fffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfa800000-0xfa807fff]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xfa800000-0xfa8fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:02: ioport range 0x290-0x29f has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x400-0x453 has been reserved
system 00:08: ioport range 0x458-0x47f has been reserved
system 00:08: ioport range 0x1180-0x119f has been reserved
system 00:08: ioport range 0x500-0x57f has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:08: iomem range 0xff000000-0xffffffff has been reserved
system 00:09: ioport range 0x454-0x457 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xe000-0xefff
pci 0000:00:01.0: MEM window: 0xf8000000-0xfa0fffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dbffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.3: IO window: 0xd000-0xdfff
pci 0000:00:1c.3: MEM window: disabled
pci 0000:00:1c.3: PREFETCH window: 0x000000dc100000-0x000000dc1fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5: IO window: disabled
pci 0000:00:1c.5: MEM window: 0xfa800000-0xfa8fffff
pci 0000:00:1c.5: PREFETCH window: disabled
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfa0fffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdbffffff]
pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:03: resource 2 pref mem [0xdc100000-0xdc1fffff]
pci_bus 0000:04: resource 1 mem: [0xfa800000-0xfa8fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
Unpacking initramfs...
Freeing initrd memory: 9189k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1336061569.076:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15839
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
Linux agpgart interface v0.103
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2012-05-03 16:12:50 UTC (1336061570)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4240k
udev[116]: starting version 164
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
r8169 0000:03:00.0: irq 28 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc90000c7a000, 00:25:22:df:ac:f6, XID 0c900800 IRQ 28
libata version 3.00 loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfa907000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905180 irq 29
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905280 irq 29
ata5: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xfa905000 port 0xfa905380 irq 29
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfa906000
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: irq 17, io mem 0xfa800000
usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: M4-CT064M4SSD2, 0009, max UDMA/100
ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA M4-CT064M4SSD2 0009 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.3: new high speed USB device using ehci_hcd and address 3
usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB DISK
usb 1-1.3: Manufacturer: SMI Corporation
usb 1-1.3: SerialNumber: AA04012700032612
usb 1-1.3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-1.4: new full speed USB device using ehci_hcd and address 3
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-1.4: New USB device found, idVendor=058f, idProduct=9254
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: Generic USB Hub
usb 2-1.4: Manufacturer: ALCOR
usb 2-1.4: configuration #1 chosen from 1 choice
hub 2-1.4:1.0: USB hub found
hub 2-1.4:1.0: 4 ports detected
usb 2-1.4.2: new low speed USB device using ehci_hcd and address 4
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1.4.2: New USB device found, idVendor=046d, idProduct=c03d
usb 2-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4.2: Product: USB-PS/2 Optical Mouse
usb 2-1.4.2: Manufacturer: Logitech
usb 2-1.4.2: configuration #1 chosen from 1 choice
usb 2-1.4.3: new low speed USB device using ehci_hcd and address 5
usb 2-1.4.3: New USB device found, idVendor=046d, idProduct=c31d
usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4.3: Product: USB Keyboard
usb 2-1.4.3: Manufacturer: Logitech
usb 2-1.4.3: configuration #1 chosen from 1 choice
usb 2-1.4.4: new low speed USB device using ehci_hcd and address 6
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1.4.4: New USB device found, idVendor=2101, idProduct=1403
usb 2-1.4.4: New USB device strings: Mfr=0, Product=3, SerialNumber=2
usb 2-1.4.4: Product: USB KVM
usb 2-1.4.4: SerialNumber: USB Mouse
usb 2-1.4.4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2:1.0/input/input1
generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.4.2/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.0/input/input2
generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4.3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.1/input/input3
generic-usb 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4.3/input1
input: USB KVM as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.0/input/input4
generic-usb 0003:2101:1403.0004: input,hidraw3: USB HID v1.11 Keyboard [USB KVM] on usb-0000:00:1d.0-1.4.4/input0
input: USB KVM as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.1/input/input5
generic-usb 0003:2101:1403.0005: input,hiddev0,hidraw4: USB HID v1.11 Mouse [USB KVM] on usb-0000:00:1d.0-1.4.4/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
EXT4-fs (sda1): mounted filesystem with ordered data mode
udev[413]: starting version 164
ACPI: SSDT 00000000bae14898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000bae0bd98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012
input: PC Speaker as /devices/platform/pcspkr/input/input8
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
loop: module loaded
fuse init (API version 7.13)
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access S31B0805 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
eth0: no IPv6 routers present
usb 2-1.4: USB disconnect, address 3
usb 2-1.4.2: USB disconnect, address 4
usb 2-1.4.3: USB disconnect, address 5
usb 2-1.4.4: USB disconnect, address 6
usb 2-1.4: new full speed USB device using ehci_hcd and address 7
usb 2-1.4: New USB device found, idVendor=058f, idProduct=9254
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: Generic USB Hub
usb 2-1.4: Manufacturer: ALCOR
usb 2-1.4: configuration #1 chosen from 1 choice
hub 2-1.4:1.0: USB hub found
hub 2-1.4:1.0: 4 ports detected
usb 2-1.4.2: new low speed USB device using ehci_hcd and address 8
usb 2-1.4.2: New USB device found, idVendor=046d, idProduct=c03d
usb 2-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4.2: Product: USB-PS/2 Optical Mouse
usb 2-1.4.2: Manufacturer: Logitech
usb 2-1.4.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2:1.0/input/input9
generic-usb 0003:046D:C03D.0006: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.4.2/input0
usb 2-1.4.3: new low speed USB device using ehci_hcd and address 9
usb 2-1.4.3: New USB device found, idVendor=046d, idProduct=c31d
usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4.3: Product: USB Keyboard
usb 2-1.4.3: Manufacturer: Logitech
usb 2-1.4.3: configuration #1 chosen from 1 choice
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.0/input/input10
generic-usb 0003:046D:C31D.0007: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4.3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.1/input/input11
generic-usb 0003:046D:C31D.0008: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4.3/input1
usb 2-1.4.4: new low speed USB device using ehci_hcd and address 10
usb 2-1.4.4: New USB device found, idVendor=2101, idProduct=1403
usb 2-1.4.4: New USB device strings: Mfr=0, Product=3, SerialNumber=2
usb 2-1.4.4: Product: USB KVM
usb 2-1.4.4: SerialNumber: USB Mouse
usb 2-1.4.4: configuration #1 chosen from 1 choice
input: USB KVM as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.0/input/input12
generic-usb 0003:2101:1403.0009: input,hidraw3: USB HID v1.11 Keyboard [USB KVM] on usb-0000:00:1d.0-1.4.4/input0
input: USB KVM as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.1/input/input13
generic-usb 0003:2101:1403.000A: input,hiddev0,hidraw4: USB HID v1.11 Mouse [USB KVM] on usb-0000:00:1d.0-1.4.4/input1
usb 1-1.3: USB disconnect, address 3